辽河西部凹陷曙北地区沙四段薄砂层成因类型及分布规律     

宋兵  王波  刘兴周  刘少治  陈希光  卢文忠 《地质与资源》2021,30(6):698-706

为了明确辽河西部凹陷曙北地区沙河街组四段薄砂层成因类型及分布规律,从岩心、测井响应和地震反射特征等方面总结了各类成因薄砂层的识别标志,并预测了各砂层组的砂体展布,探讨了砂体发育的控制因素,总结了沉积模式.研究结果表明,曙北地区沙四段为扇三角洲-湖泊的沉积体系,薄砂层发育水下分流河道、河口坝、低隆滩坝、沿岸浅滩4种成因类型,其中以水下分流河道和低隆滩坝为主.古地貌、古物源和古水深控制了各类砂体的展布.以曙光和兴隆台古潜山一线为界,南部为扇三角洲体系沉积区,主要发育前缘水下分流河道和河口坝;北部（包括低隆区）为无明显水流注入的半封闭湖湾区,主要发育低隆滩坝砂体和灰/云坪,在西侧沿岸局部地区还发育沿岸浅滩.储量区外大面积发育的低隆滩坝砂体,是下一步碎屑岩增储上产的潜在接替区域.  相似文献   

浅水三角洲物源、砂体构型与储层特征研究——以准噶尔盆地永进—莫西庄地区侏罗系三工河组二段为例     

冯怀伟  许淑梅  王金铎  张关龙  曾治平  任新成  修金磊  王千军 《地质论评》2023,69(4):2023040028-2023040028

针对准噶尔盆地腹部侏罗系三工河组物源、砂体构型及储层物性认识存在争议的问题,笔者等基于岩芯、录井、钻井等方面的资料,结合前人在准噶尔盆地周缘磷灰石及锆石年龄数据,运用沉积学、层序地层学、沉积盆地分析及储层沉积学的基本原理和方法对三工河组二段物源方向、远近和类型、沉积体系展布、砂体构型及储层物性之间的关系进行了系统的研究。研究表明,在敞流盆地快速抬升/缓慢沉降的构造背景下形成辫状河三角洲退积式沉积序列,在五级层序地层格架中,河道强冲刷叠置砂体见于第1、2砂组,三角洲退积,分支河道强烈冲刷,导致河道砂体叠置,微相类型单一,单砂体厚度向上变薄,砂体全区稳定分布,储集性较好。河道弱冲刷叠置砂体见于第3、5砂组,三角洲退积,分支河道冲刷不明显,形成河道“二元结构”,单砂体厚度向上变薄,粒度变细,储集性好;河口坝组合砂体见于第4砂组,在三角洲退积过程中,水下分流河道末端形成河口坝,总体岩性向上变细,砂体不连续,储集性好,远砂坝席状砂组合砂体见于第6、7砂组,砂体零星分布,储集性很差。在浅水、低可容纳空间、快速抬升/缓慢幕式沉降构造背景之下,浅水三角洲的物源的方向、远近及类型是影响沉积微相展布的关键因素,也是影响砂体构型及其储层物性的物质基础。  相似文献   

覆水砂土场地中桥梁群桩基础地震响应离心试验研究     

闫志晓  李雨润  王东升  王永志 《岩土力学》2023,(3):861-872

为探究覆水饱和砂土场地中土-群桩基础-桥梁结构体系动力相互作用规律,自主设计并制作了直（斜）群桩基础-桥梁结构物理相似模型,开展了不同地震动强度和不同特性地震波输入下的离心机振动台试验,分析了群桩基础-桥梁结构动力特性指标,探究了覆水饱和砂土地基超孔隙水压力发展规律和桩-土相互作用动力响应特性。研究结果表明：覆水的存在对地基土-桥梁结构体系的基本周期和阻尼影响很小,但会导致直群桩基础桥梁结构的振动幅值增加20%,而斜群桩基础桥梁结构的振动幅值降低10%;斜群桩基础模型阻尼比是直群桩基础模型的2倍。上覆水导致饱和砂土地基由受低频振动液化深度更大变为受高频振动地基液化深度更大,同时导致小震作用下促进超孔隙水压力发展,而大震作用下则反之。上覆水会增大桥梁上部结构的动力响应和桩身弯矩。上述研究结果可为覆水场地中桥梁工程抗震设计提供关键参考依据。  相似文献   

门源M6.9地震诱发地质灾害特征研究          下载免费PDF全文

王谦  钟秀梅  高中南  马金莲  万秀红  杨义煊  刘岸果 《地震工程学报》2022,44(2):352-359

2022年1月8日发生的门源M6.9地震诱发了崩塌、滑坡、砂土液化、地裂缝等多种同震地质灾害。通过对门源M6.9地震地质灾害进行现场调查,得出了地质灾害的分布特征和各类型地质灾害的主要特点,分析了地震地质灾害不发育的原因,并对地震地质灾害的长期效应进行了分析预测。研究结果表明：门源地震诱发地质灾害主要分布在震中附近;崩塌、落石总体规模较小,滑坡多为岩质滑坡,且以冰碛物和表层岩土体的溜滑为主。受表层土体冻结和孔隙水压力消散的影响,饱和砂土液化沿较窄的地裂缝呈串珠状分布,喷出物多为粉细砂。地震形成了4条左旋左阶斜列的地表破裂带,并在极震区内形成了大量的地裂缝。断层破碎带对地震动的阻隔作用、覆盖层薄、地表土冻结可能是造成本次地震地质灾害总体不发育的主要原因;地震产生的大量地裂缝导致斜坡和堆积体的稳定性减弱,在耦合集中降雨、冻融作用等因素后可能诱发滑坡灾害,松散堆积于沟床处的崩滑物作为物源,可能会增加地震影响区泥石流灾害的风险。  相似文献   

空间互相关方法在分析海底沙波迁移规律中的应用     

甘雨  马小川  阎军 《海洋学报》2019,41(4):42-52

海底沙波具有显著的活动性并能够对海底工程设施造成潜在威胁，因此对海底沙波活动性的评估一直以来受到广泛关注。目前大多数研究者仍利用平面剖面对比来分析海底沙波的迁移特征。然而，该方法难以全面高效地获取海底沙波二维平面迁移矢量。本文基于2007年和2009年的高分辨率多波束测深数据，详细阐述了空间互相关方法在分析北部湾东南海域海底沙波迁移规律中的应用过程。利用实测数据进行对比分析，获得了研究区海底沙波的活动特征，并进一步讨论了空间互相关算法中不同参数的选取对结果的影响。结果显示，利用空间互相关分析方法能够有效获取海底沙波二维迁移矢量，获得的海底沙波迁移速率和迁移方向与前人研究成果吻合，表明了该方法的可行性和可靠性。但在对实际DTM数据进行空间互相关分析时，需根据海底沙波形态、数据质量等因素选取合适的参数及矢量获取方法。本研究实验了一种确定海底沙波迁移规律的新方法，该方法将有效提升获得海底地形变化规律的效率和准确度，可获得更加精细的海底地形动力过程。  相似文献   

海水海砂混凝土双K断裂参数的确定   总被引：1，自引：1，他引：0  

臧朝会  杨树桐  金亮亮 《海洋工程》2019,37(4):142-150

采用尺寸为515 mm×100 mm×100 mm初始缝高比从0.1变化至0.8的三点弯曲梁试件,利用试验测得起裂荷载Pini、最大荷载Pmax及对应的裂缝口张开位移CMODc等参数,研究了缝高比a0/h对海水海砂混凝土双K断裂参数的影响。并以相同配合比的淡水河砂梁作为对照组,进一步研究了海砂海水混凝土双K断裂参数与普通混凝土之间的关系。结果发现海水海砂混凝土断裂参数在a0/h=0.25～0.7范围内时可以认为是一常数;海水海砂混凝土梁断裂参数比相同配合比情况下的淡水河砂梁大且对边界影响更加敏感。  相似文献   

Selection of sand models and identification of parameters using an enhanced genetic algorithm          下载免费PDF全文

Yin‐Fu Jin  Zhen‐Yu Yin  Shui‐Long Shen  Pierre‐Yves Hicher 《国际地质力学数值与分析法杂志》2016,40(8):1219-1240

Numerous constitutive models of granular soils have been developed during the last few decades. As a consequence, how to select an appropriate model with the necessary features based on conventional tests and with an easy way of identifying parameters for geotechnical applications has become a major issue. This paper aims to discuss the selection of sand models and parameters identification by using genetic algorithm. A real‐coded genetic algorithm is enhanced for the optimization with high efficiency. Models with gradually varying features (elastic‐perfectly plastic modelling, nonlinear stress–strain hardening, critical state concept and two‐surface concept) are selected from numerous sand models as examples for optimization. Conventional triaxial tests on Hostun sand are selected as the objectives in the optimization. Four key points are then discussed in turn: (i) which features are necessary to be accounted for in constitutive modelling of sand; (ii) which type of tests (drained and/or undrained) should be selected for an optimal identification of parameters; (iii) what is the minimum number of tests that should be selected for parameter identification; and (iv) what is the suitable and least strain level of objective tests to obtain reliable and reasonable parameters. Finally, a useful guide, based on all comparisons, is provided at the end of the discussion. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Genealogy of hypoplasticity and barodesy          下载免费PDF全文

Dimitrios Kolymbas  Gertraud Medicus 《国际地质力学数值与分析法杂志》2016,40(18):2532-2550

This article is an attempt at providing an insight into the development of hypoplasticity (including barodesy, which is a recent development of hypoplasticity) as a theory elaborated since 1977, when the first version was published by the first author, until present. The multiplicity of the many versions published since then is hard to overlook. This article presents a review and insight into the evolution of a theory and the struggle to formulate a satisfactory constitutive law. Among the many proposed versions, we focus on those ones that can be seen as changes of paradigm. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Explicit stress–strain equations for modeling frictional materials     

Kenneth J. Xu  Martin D. Liu  Buddhima Indraratna 《Marine Georesources & Geotechnology》2018,36(6):722-734

In this paper, a comprehensive study on simulating the shearing behavior of frictional materials is performed. A set of two explicit equations, describing the relationship among the shear stress ratio and the distortional strain and the volumetric strain, are formulated independently. The equations contain three stress parameters and three strain parameters and another parameter representing the nonuniformity of stress and strain during softening. All the parameters have clear physical significance and can be determined experimentally. It is demonstrated that the proposed equations have the capacity of simulating the complicated shearing behavior of many types of frictional materials including geomaterials. The proposed equations are used to simulate the stress–strain behavior for 27 frictional materials with 98 tests. These materials include soft and stiff clays in both reconstituted and structured states, silicon sands and calcareous sands, silts, compacted fill materials, volcanic soils, decomposed granite soils, cemented soils (both artificially and naturally cemented), partially saturated soils, ballast, rocks, reinforced soils, tire chips, sugar, wheat, and rapeseed. It has been demonstrated that the proposed explicit constitutive equations have the capacity to capture accurately the shearing behavior of frictional materials both qualitatively and quantitatively. A study on model parameters has been performed.  相似文献   

砂土液化大变形本构模型及在ABAQUS软件上的实现   总被引：1，自引：0，他引：1  

庄海洋  陈国兴 《世界地震工程》2011,27(2)

基于Yang和E lgam al等人提出的砂土液化大变形本构模型,对该模型的建立过程进行了详细的推导,基于新的嵌套屈服面硬化规则,对原有模型的硬化规则的不连续性做了改进,把该本构模型扩展应用到三维液化大变形的数值分析中,实现了基于ABAQUS大型商用软件计算平台上砂土液化大变形的计算子程序的开发,基于该计算平台和开发的本构模型,对动三轴试验体系中砂土试样的液化过程进行了数值试验分析,给出了试验过程中试样的竖向动位移、整体竖向应力应变关系滞回曲线和动孔压时程曲线的数值计算结果。文中初步验证了该模型在ABAQUS上开发的子程序的可靠性和数值计算模型的可行性,模型的可靠性及其子程序的稳定性还需通过试验结果和数值计算结果的对比分析与进一步验证。  相似文献